Please Click on the Service to view more Detailed Information.
Please note that there may be an additional charge applied to any flat rate service for cleaning if the part(s) to be worked on are brought in extremely dirty. This is due to 2 reasons. We can't do a good good if we can't see what we are doing. We take pride in our workmanship.
Labor Rate Per Hour - $99.00
Boring and Reconditioning Cylinders
Fuel Injector Service
Cleaning, Surface Conditioning Services
Tire Services
Other Services
Please note that there may be an additional charge applied to any flat rate service for cleaning if the part(s) to be worked on are brought in extremely dirty. This is due to 2 reasons. We can't do a good good if we can't see what we are doing. We take pride in our workmanship.
Labor Rate Per Hour - $99.00
Boring and Reconditioning Cylinders
- 2 Stroke - $149.00
- 4 Stroke - $139.00
- Blind Hole - $199.00
- Over 2.0mm removal - Additional $40.00
- Deglaze Cylinder - $35.00
- Replate Cylinder 2 Stroke - $429.00 (stripped of parts) some exceptions *
- Replate Cylinder 4 Stroke - $389.00 (stripped of parts) some exceptions *
- Replate Cylinder OVERSIZE - Additional $100.00
- Resleeve 2 Stroke Cylinder w p/v (sleeve additional) - $299.00
- Resleeve 4 Stroke Cylinder (sleeve additional) - $175.00
- Recondition 2 Valve 4 Stroke Cylinder Head - $185.00
- Recondition 5 Valve 4 Stroke Cylinder Head - $250.00
- Recondition 4 Valve 4 Stroke Cylinder Head - $215.00
- Recondition 8 Valve 4 Stroke Cylinder Head - $325.00
- Recondition 16 Valve 4 Stroke Cylinder Head - $385.00
- Recondition 20 Valve 4 Stroke Cylinder Head - $415.00
- Install Valve Guides or Guide Liners (up to 2) - $32.50 ea.
- Install Valve Guides (4 or more) - $30.00 ea.
- Install New Valve Seat - $100.00 (seat extra)
- Reface Intake or Exhaust Valve (ea.) - $10.00
- Resurface Cylinder Head Surface - $145.00
- Crankshaft Rebuilding Single 2 Stroke - $125.00
- Crankshaft Rebuilding Single 4 Stroke - $139.00
- Crankshaft Rebuilding Twin - $295.00
- Crankshaft Rebuilding Triple - call
- Rebuild Fork std - $115.00 ea.
- Rebuild Fork Cartridge Type - $155.00 ea.
- Rebuild Shock Std Decarbon typed - $229.00
- Rebuild "non rebuildable" ie early VFR750 or Virago shock - $359.00
- Rebuild Snow Shock (emulsion) - $65.00
- Rebuild Snow Shock (floating piston) - $85.00
- Revalve Fork Cartridge MotocrossType - $485.00 pair
- Revalve Fork Cartridge Street Type - $499.00 pair
- Revalve Shock - $379.00
- Revalve Shock PDS with needle - $575.00
- Lower Suspension Frt & Back - Additional - $115.00
- Rechrome Fork Tubes - $289.00 ea.
- Rechrome Shock Shaft - $239.00 ea.
- Custom wound Shock or fork Springs - $299.95
- Cut 2 Stroke Cyl head or base - $95.00
- Modify 2 Stroke Cyl head - $199.00 (with welding) - $255.00
- Port 2 Stroke Cyl/Head Mods - $450.00
- Port 4 Stroke Head (Single) - $575.00 (Twin) - $650.00 (4 Cyl) - $995.00
- We do not offer a flat rate service on this. To be fair to you we charge by the hour as the time can vary dramatically to do the job depending on if and how many valves actually need adjusting. Call us for an aprox idea.
Fuel Injector Service
- Test Injectors $15.00 Single, 2 or more $12.50 each
- Clean Injectors $8.00 each additional
Cleaning, Surface Conditioning Services
- Vapor or Soda Blast Parts - $75.00 for 30 minutes (example time single cyl engine cases take aprox 1/2 hour - Parts must be clean)
- Ultra Sonically Clean Parts (disassembled) - $75.00
Tire Services
- Tire Change Off Dirt off bike - $39.50 ($49.50 if customer supplies tire)
- Tire Change Street off Bike - $27.50 ($34.50 if customer supplies tire)
- Tire Balance off Bike - $27.50 ($34.50 if customer supplies tire)
- Tire Change front Street on Bike - $85.00 ($105.00 if customer supplies tire)
- Tire Change rear Street on Bike - $95.00 ($115.00 if customer supplies tire) (some exceptions)
Other Services
- Welding, Maching and or fabricating - Hourly
- HEL Brand Brake Hoses - Made to your requirements - Price on Request
- Custom Control cables and - Made to your requirements - Price on Request
- Custom Engine Paper gaskets - Price on Request
- Straighten Damaged Wheels (to within oem runout) - $250.00
- Seal Gas Tank (off bike) - Hourly + Sealant
- Safety Inspection - $99.00
- Rewind Snowmobile or Dirt Bike Magneto (1 coil) - $295.00 (2 coils) - $375.00
- Pickup or deliver Bike - $65.00 per Hour (time we leave till time we return)
- Yamaha R6 2017-2018
- Yamaha R1 2009-2018
- Yamaha FZ10 2017
- Yamaha MT-10 2018
- Kawasaki 2012 - 2022 ZX14R
- Kawasaki ZX-6R 2019 -2022
- Kawasaki Ninja 400 2023
- Kawasaki Z900 2017-2023
- KTM TPI 2 Stroke Models
- Suzuki GSXR600 08-21 GSXR750 08-21 GSXR1000 07-16